WAGO 750-555 4-channel analog output, I/O System 750/753. This analog output module generates standard 4–20 mA signals.

The output signal is electrically isolated and transmitted with a resolution of 12 bits.

Power is derived from the field side.

The module's output channels have a common ground potential.

Technical data

Number of analog outputs 4

Total number of channels (module) 4

Signal type Current

Signal type (current) 4 … 20 mADC

Actuator connection 4 x (2-wire)

Resolution [bit] 12Bit

Data width 4 x 16-bit data; 4 x 8-bit control/status (optional)

Load impedance Either 0 … 300 Ω or 300 … 600 Ω (same resistance for all load impedances)

Conversion time (typ.) 10ms

Measurement error (reference temperature) 25°C

Measurement error, deviation (max.) from the upper-range value 0.1%

Temperature error (max.) of the upper-range value 0.01%/K

Output error, deviation (max.) of the upper-range value 0.1%

Temperature error (max.) of the output range value 0.01%/K

Recovery time (typ.) 100ms

Supply voltage (system) 5 VDC; via data contacts

Current consumption (5 V system supply) 60mA

Supply voltage (field) 24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission (field side supply voltage only) via spring contact)

Isolation 500 V system/field

Indicators LED (A) green: function; LED (B) red: Error

Number of incoming power jumper contacts 2

Number of outgoing power jumper contacts 2